If you are fighting condensation and black mould in a house, flat or rented property, a positive input ventilation (PIV) unit is often the simplest whole-home fix. The right unit depends on three things: whether there is a usable loft, how big the property is, and whether you want a heater to temper the incoming air. Below are the PIV units we actually supply and recommend, what each is best for, and the honest limits of PIV.

Quick answer: For most houses with a loft, the Vent-Axia PoziDry Pro with Heater 476311 (£381.99) is our best all-round PIV unit, covering homes up to 150 m² with an integral heater and data logging. On a tighter budget, the non-heated PoziDry Pro 476310 (£289.99) does the same job without the heater. For flats with no loft, choose the wall-mounted PoziDry Compact Pro 479188 (£368.99) or the Elta SANO IPIV WALL H (£433.82). For larger or multi-storey homes and social housing, the PoziDry Pro Multi Storey 476312 (£538.99) covers up to 200 m² and adds a fire damper.

How PIV cures condensation (in 30 seconds)

A PIV unit draws filtered air from the loft (or from outside, for wall-mounted units) and feeds it gently into the home, usually through a ceiling diffuser on the landing or in the hallway. That small, continuous supply slightly pressurises the property, pushing moist, stale air out through the natural gaps in the building and diluting humidity so it no longer condenses on cold windows and walls. If you want the full explanation, read What is positive input ventilation?. If you are deciding between PIV and heat recovery, see PIV vs MVHR.

Best PIV units by use

Vent-Axia PoziDry Pro PIV unit with heater 476311

Best loft-mounted PIV overall: Vent-Axia PoziDry Pro with Heater 476311 £381.99
Our most recommended unit for typical houses. Selectable air capacities to suit floor areas up to 150 m², an integral heater that can sit at the unit or at the diffuser (up to 4 °C warmer at the room), Smart Sense control with data logging, anti-vibration joist legs, and sound levels from 9 dB(A). G4 filter as standard with an F7 (PM2.5) option. We have reviewed it in detail in our PoziDry Pro review. View the PoziDry Pro with Heater.

Vent-Axia PoziDry Pro PIV unit 476310 without heater

Best budget PIV: Vent-Axia PoziDry Pro 476310 £289.99
The same loft-mounted PoziDry Pro platform without the heater, so it is the lowest-cost way into a quality PIV system. Up to 150 m², Smart Sense control, Lo-Carbon motor, sound as low as 9 dB(A), G4 filter with up to 5 years maintenance-free life and an F7 option. Supplied with flexible ducting, jubilee clips and ceiling grille. A good choice in milder parts of the UK, or where occupants are unlikely to notice slightly cooler air at the diffuser. View the PoziDry Pro 476310.

Elta SANO IPIV LOFT H loft-mounted PIV unit with heater

Best PIV with heater and automatic sensing: Elta SANO IPIV LOFT H £439.99
A loft-mounted PIV with a built-in heater and integral temperature and humidity sensors that regulate airflow automatically. Two filters remove dust, pollen and external pollutants, and it can be floor or ceiling mounted in any position. Choose it if you want the unit to adjust itself rather than relying on a fixed setting. For a side-by-side of the two brands, read Vent-Axia vs Elta: which PIV unit to choose. View the Elta SANO IPIV LOFT H.

Vent-Axia PoziDry Compact Pro wall-mounted PIV 479188

Best for flats with no loft: Vent-Axia PoziDry Compact Pro 479188 £368.99
Described by Vent-Axia as the smallest PIV unit on the market, with an integral heater. It wall mounts over 1.8 m from the floor in any of 16 orientations, airflow is adjustable in 1 l/s steps up to 30 l/s, and running costs start from less than 9p per week (fan only). Keep total rigid duct to 2.5 m with no more than two 90° bends. Ideal for flats with mould in a habitable room. Spare G4 filters are £30.89. View the PoziDry Compact Pro.

Elta SANO IPIV WALL H wall-mounted PIV unit

Alternative for flats and room-in-roof bungalows: Elta SANO IPIV WALL H £433.82
Mounted on an external wall, supplying air to a central ceiling point (usually the hallway) or straight out of the end panel grille. Six installer settings from 11 to 29 l/s, fan power 3.6 to 15.6 W (higher with the heater on), a multicore heater with selectable supply temperature of 10 °C to 20 °C, ECO-LoFlo control and a very large G2 filter for low maintenance. Optional PIV B and PIV B+H switches add boost and heater control. View the Elta SANO IPIV WALL H.

Vent-Axia PoziDry Pro Multi Storey PIV 476312 with fire damper

Best for large homes and social housing landlords: Vent-Axia PoziDry Pro Multi Storey 476312 £538.99
Built for bigger and multi-storey properties up to 200 m², fully adjustable between 11 and 60 l/s. It has a built-in 500 W heater, a fire damper that can be wired to a fire alarm, intumescent ducting and a fire-stopping diffuser rated up to 1 hour, plus automatic summer shut-off and a radon mode. For landlords and housing associations, the Smart Sense data logging is useful evidence that ventilation has been running when a damp and mould complaint is investigated. View the PoziDry Pro Multi Storey.

Buying for a portfolio? If you are specifying PIV across multiple properties, send us the property types, floor areas and whether each has a loft. We will match units, check stock and lead times, and quote trade pricing. Call 0161 399 3825 or get in touch.

PIV comparison table

Model Mounting Coverage / airflow Heater Price
Vent-Axia PoziDry Pro 476310 Loft Up to 150 m² No £289.99
Vent-Axia PoziDry Compact Pro 479188 Wall (no loft) Up to 30 l/s, flats and apartments Yes £368.99
Elta PIV ONE Loft (floor or ceiling) Whole house (ask us for sizing) No £380.59
Vent-Axia PoziDry Pro with Heater 476311 Loft Up to 150 m² Yes £381.99
Elta SANO IPIV WALL H Wall (no loft) 11 to 29 l/s (6 settings) Yes £433.82
Elta SANO IPIV LOFT H Loft (floor or ceiling) Whole house, sensor-controlled Yes £439.99
Elta PIV ONE PLUS+ Loft (floor or ceiling) Whole house, humidity boost Yes £475.19
Vent-Axia PoziDry Pro Multi Storey 476312 Loft Up to 200 m², 11 to 60 l/s Yes (500 W) £538.99

See the full range in our Positive Input Ventilation collection.

PIV pros and cons: the honest version

PIV is excellent at what it does, but it is not magic. Here is the balanced picture we give customers on the phone.

Pros Cons
One unit treats the whole home, so there is no need to fit fans in every room It runs continuously, so there is a small ongoing electricity cost, and more if the heater is used often
Simple loft installation, usually done in a day with a single ceiling diffuser Without a heater, incoming air in winter can feel cool near the diffuser
Very low running costs on the fan itself (the Compact Pro quotes from less than 9p per week) It does not recover heat from outgoing air the way MVHR does
Filtered air: G4 as standard, with F7 (PM2.5) upgrades on the PoziDry Pro range Filters need checking and replacing to keep airflow up
Quiet: the PoziDry Pro quotes from 9 dB(A) In very airtight homes the air needs somewhere to escape, so trickle vents and extract fans should stay in use
Can help reduce radon concentration (several units on this list mention it) It treats the symptom of excess moisture, not structural damp (see below)
Data logging on Vent-Axia Smart Sense units helps landlords show the system is working Loft air can be warm in summer; look for summer shut-off or temperature-based control

Common mistake: switching off the bathroom and kitchen extract fans once PIV is fitted. PIV dilutes moisture across the home, but steam from showers and cooking should still be extracted at source.

When PIV won't fix it

PIV works on condensation, which is moisture from inside the home (breathing, cooking, washing, drying clothes) settling on cold surfaces. It will not cure damp that comes from the building itself. Before buying, rule out these:

  • Penetrating damp: water getting in from outside through failed pointing, cracked render, leaking gutters, a faulty roof or poorly sealed windows. Signs include patches that grow after rain and stains on one wall rather than on cold corners and window reveals. Fix the leak first.
  • Rising damp: ground moisture drawn up masonry because a damp-proof course has failed or been bridged. It typically shows as a tide mark up to around a metre above floor level, often with salts. This needs a damp survey and a building repair, not ventilation.
  • Plumbing leaks: a hidden leak under a bath or in a wall will keep feeding mould whatever the ventilation.
  • No loft and no suitable external wall: a loft PIV needs a reasonably clean, dry loft above the living space. Flats and room-in-roof homes need a wall-mounted unit such as the PoziDry Compact Pro or SANO IPIV WALL H, which need an external wall for the air intake. If neither works, look at continuous extract or MVHR.
  • Severe cold bridging: uninsulated solid walls or missing loft insulation create surfaces so cold that condensation can persist. Ventilation helps, but insulation is part of the fix.

Rule of thumb: if the mould is on cold external corners, window reveals, behind furniture and in bedrooms, and the windows stream in the morning, it is condensation and PIV is a good fit. If it follows rain, sits low on walls or appears in one isolated patch, investigate the building first.

Sizing PIV by property type

Most loft PIV units are sized by floor area and set up at commissioning. Use manufacturer figures, not guesswork:

Property Typical choice Why
Flat or apartment, no loft PoziDry Compact Pro 479188 or Elta SANO IPIV WALL H Wall mounted; up to 30 l/s (Compact Pro) or 11 to 29 l/s settings (SANO WALL H)
Bungalow or 2 to 3 bed house with a loft, up to 150 m² PoziDry Pro 476311 (heater) or 476310 (no heater) Selectable capacities for floor areas up to 150 m²
Larger or multi-storey house, up to 200 m² PoziDry Pro Multi Storey 476312 Adjustable 11 to 60 l/s, fire damper and fire-rated diffuser
Social housing or rental stock PoziDry Pro range (476311 or 476312) Smart Sense data logging and settings, consistent spec across a portfolio
Above 200 m² or unusual layouts Talk to us May need more than one unit, or MVHR

The diffuser is normally placed centrally on the top-floor landing or in the hallway of a flat, away from bedroom doors, so air can spread through the home. Installation should be carried out by a competent person.

Not sure which size? Send us the floor area, number of storeys, whether there is a loft and where the mould is appearing. We will recommend a unit and confirm stock. Call 0161 399 3825 or contact us.

FAQs

What is the best PIV unit for condensation in the UK?

For a typical house with a loft, we recommend the Vent-Axia PoziDry Pro with Heater 476311 (£381.99). It covers up to 150 m², has an integral heater and data logging, and is very quiet. For flats without a loft, the PoziDry Compact Pro 479188 (£368.99) is our first choice.

Do I need a PIV unit with a heater?

Not always. A heater tempers incoming air so it does not feel cool near the diffuser in winter. It is worth having in colder parts of the UK, in homes with vulnerable occupants, or where the diffuser is near a living area. If cost matters more, the non-heated PoziDry Pro 476310 (£289.99) works the same way.

Will a PIV unit get rid of black mould?

PIV removes the conditions mould needs by lowering humidity and stopping condensation. Existing mould should still be cleaned off and treated. If the mould is caused by penetrating or rising damp, PIV will not fix it.

Can I fit PIV in a flat without a loft?

Yes. Wall-mounted units such as the Vent-Axia PoziDry Compact Pro and the Elta SANO IPIV WALL H draw air from outside through an external wall and supply it to a central point, usually the hallway.

How much does a PIV unit cost to run?

The fan itself is very cheap to run. Vent-Axia quotes the PoziDry Compact Pro from less than 9p per week. Heater use adds to that, so units with temperature-controlled heaters and summer shut-off help keep costs down.

Is PIV suitable for social housing?

Yes, it is widely used by landlords to tackle condensation and mould. The PoziDry Pro range logs data through Smart Sense, which helps demonstrate the system is working, and the Multi Storey 476312 adds fire protection for larger properties.


Last updated: October 2026. Specifications and prices are indicative and can change; confirm current availability, lead time and pricing before ordering. For a sizing recommendation, get in touch.

Buyer's guide, Condensation, Elta, Mould, Piv, Positive input ventilation, Social housing, Vent-axia